Bergermaster Craftsmen Nukote PVA Paint – White (5L)
Achieve a smooth, durable, and cost-effective finish for medium-scale architectural, interior, and residential painting projects with Bergermaster Craftsmen Nukote PVA Paint (White, 5L). Formulated as a high-quality interior and exterior matt acrylic PVA emulsion paint, Nukote delivers excellent hiding power, high coverage yield, and smooth application across new and previously painted masonry surfaces.
Key Features & Highlights
High-Opacity Matt Finish: Delivers strong hiding power and coverage, effortlessly concealing minor surface flaws with a clean, low-glare white finish.
Interior & Exterior Performance: Engineered to withstand varied weather conditions on exterior walls while providing an attractive finish for indoor walls and ceilings.
Convenient 5-Litre Pack: Ideal size for touch-ups, single-room renovations, boundary walls, and medium-scale contractor projects.
Easy Application & Clean-Up: Applies smoothly with a roller, brush, or airless spray system, and cleans up easily with water before drying.
Quick-Drying Formula: Rapid recoat times allow multiple coats to be applied in a single day, accelerating project completion.
Technical Specifications
Component / Parameter | Specification Details |
Product Type | Architectural Matt Acrylic PVA Paint |
Color Finish | Brilliant White / White Matt |
Container Volume | 5 Litres |
Base Material | Water-Based Acrylic Polymer Emulsion |
Application Environment | Interior & Exterior Masonry Surfaces |
Theoretical Spreading Rate | Approx. 8 – 10 m² per Litre (Dependent on surface porosity) |
Touch Dry Time | 30 to 60 Minutes (At standard 23°C / 50% Relative Humidity) |
Recoating Interval | 2 to 4 Hours |
Cleanup Medium | Clean Water |
Recommended Surface Preparation & Application
Surface Preparation: Ensure all surfaces are clean, dry, sound, and free from dirt, dust, oil, grease, algae, or flaking paint.
Priming Requirements:
New Plaster / Masonry: Apply an appropriate alkali-resistant masonry sealer or plaster primer prior to topcoat application.
Previously Painted Surfaces: Sand glossy or enamel finishes lightly to create a mechanical key, wash down, and allow to dry completely.
Application Method: Stir thoroughly with a flat paddle before and during use. Apply 2 generous coats using a high-pile roller, quality paint brush, or airless spray configuration.
Drying Conditions: Do not apply if ambient temperature is below 10°C or if rain/dew is expected within 4 hours of application.
Safety & Health Precautions
Safety Notice: Keep out of reach of children and pets. Ensure adequate ventilation during application and drying indoors. Avoid direct contact with skin and eyes.
Eye Contact: Flush immediately with generous amounts of clean running water for at least 15 minutes and seek medical advice if irritation develops.
Skin Contact: Wash thoroughly with soap and water or a recognized skin cleanser.
Personal Protective Equipment (PPE): Wear protective eye goggles, a suitable dust mask when sanding, and rubber gloves during application.
){kind=link}